High Gain 10 dBi Universal Wide-Band 4G/LTE, 5G & WiFi Omni-Directional Outdoor Pole/Wall Mount Antenna for Verizon, AT&T, T-Mobile

0 reviews

SFr115.92

Brand: Ebeestock
Product Code: EBST0000925
Availability: In Stock

Qty

- +

Total SFr115.92

Mobile

Product information

Antenna	4G/LTE, 5G, WiFi Omni-Directional Wideband Antenna
Brand	Ebeestock
Number of Channels	1
Impedance	50 Ohm
Item Dimensions LxWxH	3 x 3 x 10.6 inches
ProductDimensions	3 x 3 x 10.6 inches
ItemWeight	1 pounds

Product features

IMPROVES SIGNAL STRENGTH and SPEED on Verizon, AT&T, T-Mobile, Telus, Bell Canada, Rogers, DigiCel and all 4G LTE & 5G Sub-6 cellular broadband services or use as a Wi-Fi Antenna (600 - 6000 MHz)
COMPATIBLE WITH routers, modems and gateways from CalAmp, Cisco, Cradlepoint, Digi, MoFi, Netgear, Novatel, Pepwave, Ebeestock, Sierra, SureCall, weBoost, Wilson, ZTE and many others
WEATHER and IMPACT RESISTANT sleek white ABS radome. Includes STAINLESS STEEL 2-way pole/wall mounting bracket and hardware (mast sold separately)
INTEGRATED FEMALE N CONNECTOR: No additional ground plane needed
MUST BE CONNECTED VIA 50 OHM COAXIAL CABLE TO AN EXISTING CELLULAR MODEM/ROUTER/RADIO DEVICE. Does not improve signal for cell phones or other devices not directly wired to the antenna

Product Description

Ebeestock High Gain 10 dBi Wide-Band 4G/LTE, 5G, WiFi Antenna

Ebeestock's small, light-weight, easy-to-install permanent mount omni-directional antenna improves transmit and receive signals for all 4G/LTE and 5G Sub-6 frequencies on Verizon, AT&T, Sprint, T-Mobile, US Cellular, Bell, Rogers, Telus, Telcel, Movistar, Digicel and many other cellular operators worldwide.

This antenna also supports both the 2.4 GHz and 5.8 GHz WiFi frequency bands.

The omni-directional design provides high gain without the cellular tower location and alignment hassles of directional antennas. Its powerful high efficiency radiating elements maximize the energy output of your radio device.

With its compact size, white finish and all stainless hardware, it is ideal for outdoor applications including rooftops, utility poles, surveillance trailers, well sites, meters, homes and offices.

With the appropriate adapter cable (not included), this antenna is compatible with USB cellular modems and Mi-Fi Hotspots, external 4G/5G cellular modems, routers and signal amplifiers from companies such as CalAmp, Cisco, Cradlepoint, Digi, MoFi, Netgear, Novatel, Pepwave, Ebeestock, Sierra Wireless, SureCall, weBoost/Wilson and ZTE.

Requires a direct wired connection to an existing modem, router, amplifier/booster. WILL NOT boost reception of cell phones – they require a powered booster/amplifier.

Specifications

Freq. Range:	600 - 6000 MHz
Peak Gain:	10 dBi
Radiation:	Omni
Polarization:	Vertical
Impedance:	50 ohms
Connector:	N Female - integrated bottom feed
Material:	White UV stable ABS radome & stainless steel mounting hardware
Height:	9.1 in (23 cm) - with bracket 12.3 in (31 cm)
Mount:	Redesigned Horizontal & Vertical Pole/Wall Bracket (U-bolts for 1.25" ~ 2.0" dia masts included)

You May Also Need


Coax is Critical The wrong cabling can wipe out antenna gain. Use only low-loss 50 Ohm coax designed for high frequency applications like our ANT-140-020 series available in multiple pre-made lengths.	Water is the Enemy If moisture gets into the cabling it can create intermittent shorts and permanent damage. Seal all outdoor connections with our ANT-900-002 Pro-Grade Coax Silicone Sealing Tape.	Protect Yourself Outdoor antennas should include inline lightning arresters to protect equipment and structures. Our ANT-2xx-001 series gas discharge lightning arresters protect against strikes up to 10 kA.

For Best Results

Orient antenna vertically
Mount antenna as high as possible
Keep coax leads as short as possible
Don't use 75 Ohm coax (RG6, RG59)
Don't use a splitter to connect 2 modem ports to one antenna
Fully tighten coax connectors to antenna connectors
Position away from other antennas, lighting fixtures, motors, Low-E or tinted/coated windows, large metal or concrete objects
Stand 3+ feet away from antenna when testing
Maximize signal Quality (SINR, RSRQ) not signal Strength (RSSI, RSRP, bars)